Journal cover Journal topic
Ocean Science An interactive open-access journal of the European Geosciences Union
Ocean Sci., 6, 503-511, 2010
https://doi.org/10.5194/os-6-503-2010
© Author(s) 2010. This work is distributed under
the Creative Commons Attribution 3.0 License.
 
18 May 2010
Biofouling protection for marine environmental sensors
L. Delauney1, C. Compère2, and M. Lehaitre2 1In Situ Measurement and Electronics Group, Ifremer, B. P. 70, 29280, Plouzané, France
2Interfaces and Sensors Group, Ifremer, B. P. 70, 29280, Plouzané, France
Abstract. These days, many marine autonomous environment monitoring networks are set up in the world. These systems take advantage of existing superstructures such as offshore platforms, lightships, piers, breakwaters or are placed on specially designed buoys or underwater oceanographic structures. These systems commonly use various sensors to measure parameters such as dissolved oxygen, turbidity, conductivity, pH or fluorescence. Emphasis has to be put on the long term quality of measurements, yet sensors may face very short-term biofouling effects. Biofouling can disrupt the quality of the measurements, sometimes in less than a week.

Many techniques to prevent biofouling on instrumentation are listed and studied by researchers and manufacturers. Very few of them are implemented on instruments and of those very few have been tested in situ on oceanographic sensors for deployment of at least one or two months.

This paper presents a review of techniques used to protect against biofouling of in situ sensors and gives a short list and description of promising techniques.


Citation: Delauney, L., Compère, C., and Lehaitre, M.: Biofouling protection for marine environmental sensors, Ocean Sci., 6, 503-511, https://doi.org/10.5194/os-6-503-2010, 2010.
Publications Copernicus
Special issue
Download
Share